Product Types and Certification Schemes

Plumbing Products

SNI 03-0797-2006 - Water closet
SNI 06-0084-2002 - PVC pipe for drinking water line
SNI 06-0135-1987 - PVC pipe fittings for drinking water line
SNI 06-0162-1987 - PVC pipe for waste water inside and outside buildings
SNI 06-0178-1987 - PVC pipe fittings for waste water inside and outside buildings
SNI 7276:2014 - Plastic –cylinder vertical Water tank - PE
SNI 8456-2017 - Rainwater Infiltration Wells and Trenches
UPC Standard (America and Canada Standard)
Saudi Standard – Western and eastern closets
SNI 8456-2017 - Rainwater Infiltration Wells and Trenches
Philippines National Standard (PNS)
SNI 4829-1,2,3-2015 - PE plastic piping systems and fittings for drinking water - General, Pipe, Fittings
SNI ISO 15874-1,2,3-2012 - Polypropylene (PP) hot cold water piping system
SNI 579-2020 - Ceramic lavatory
SNI 1148-2021 - Ceramic urinal
SNI 680-2021- Squat water closet

Building Materials

SNI ISO 13006:2010 - Floor tile
SNI 15-0047-2005 - Flat glass
SNI 15-0048-2005 - Tempered safety glass for motor vehicle
SNI 15-1326-2005 - Laminated glass for motor vehicle
SNI 15-4756-1998 - Mirror glass sheet for general use
SNI ISO 21690:2013 - Glass for building - glass block
SNI ISO 25537:2011 - Glass for building : silver plated sheet glass mirror
SNI 03-6384-2000 - Gypsum
SNI 3564:2014 - Wall Paints
SNI 8011:2014 - Decorative paints
SNI 0068:2013 - Carbon steel pipe for general constructions
SNI 0139:2008 - Threaded maleable cast iron black pipe connector
SNI 0039:2013 - Water pipes with or without zinc coating
SNI 15-3758-2004 - Masonry cement
SNI 2049:2015 - Portland cement
SNI 15-3500-2004 - Mixed portland cement
SNI 7064:2014 - Portland composite cement
SNI 0302:2014 - Portland pozolan cement
SNI 07-0052-2006 - Steel Canal profile from the hot rolling mill process
SNI 07-0329-2005 - The I-beam profile steel from the hot rolled process
SNI 07-2054-2006 - Elbow steel profile from hot rolled process
SNI 07-7178-2006 - Wide Flange (WF) beam Steel profile from hot rolled process
SNI 2610-2011 - Steel H-beam profile from the process of hot rolled or welding
SNI 07-2052-2017 - Concrete reinforcement steel
SNI 07-0065-2002 - Reinforced concrete steel from reroiling
SNI 07-0954-2005 - Concrete reinforcement steel in the form of rolls
SNI 7614-2010 - Steel bar for general purposes
SNI 8299-2017 - Flat cement board non asbestos
SNI 1027:2015 - Flat cement sheet
SNI 8665:2018 - Water-Based Leakproof Paint
SNI 8293:2017 - Cold Plastics Specifications for Road Markings
SNI 8399:2017 - Light Steel Frame Profile
SNI 0096-2007 - Concrete Roof Tiles
SNI 1154:2016 - Seven Twisted Steel Wire without Twisted For Precast Concrete Construction (PC Strand/KBjP-P7)
SNI 1155:2016 - Layered steel wire for concrete construction (PC wire/KBjP)
SNI 7701:2016 - Tempered steel wire for concrete construction (PC bar/KBjP-Q)
SNI 07-0040-2006 - Low Carbon Steel Wire
SNI 07-0053-2006 - Low Carbon Steel Wire Bars
SNI 07-1579-1989 - Carbon Steel and Alloy Steel Rods for Cold Working
SNI 8884.1&2:2020 - Plastic piping system for gas dispensing
SNI 8294:2016 - Paint of the ballast tank of the ship dan SNI 502:2016 Anti-Fouling Paint For Boat Hulls Under Water Lines
SNI ISO 4586-3:2017 - High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (usually called laminates) — Part 3: Classification and specifications for laminates less than 2 mm thick and intended for bonding to supporting substrates
SNI ISO 4586-4:2017 - SNI ISO 4586-3:2017 - High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (usually called laminates) — Part 3: Classification and specifications for laminates less than 2 mm thick and intended for bonding to supporting substrates
SNI ISO 4586-7:2017 - SNI ISO 4586-3:2017 - High-pressure decorative laminates (HPL, HPDL) — Sheets based on thermosetting resins (usually called laminates) — Part 3: Classification and specifications for laminates less than 2 mm thick and intended for bonding to supporting substrates
SNI 07-0601-2006 - Sheet steel, plates and hot rolled rolls (Bj P)
SNI 07-2053-2006 - Sheet steel Zinc coated (Bj LS)
SNI 07-3567-2006 - Sheet steel and cold rolled rolls (Bj D)
SNI 4096:2007 - Sheet and roll Steel - aluminum-zinc alloy coated (Bj.L AS)
SNI 7033:2020 - Specification of hot-dip galvanization (Hot dip galvanized) on iron and steel products
SNI 7504:2011 - Material specifications fiberglass reinforced plastic water treatment plant unit
SNI 8640:2018 - Specifications of lightweight bricks for wall
SNI 8986:2021 – Carbon steel hot rolled bar for machine structure
SNI 8522 8784 - Steel sheet
SNI 0602-2012 - Electrolyzed tin-coated sheet steel
SNI 66-2019&8305-2019 - LS and LAS steel color
SNI 8987-2021 - Scaffolding steel pipe
SNI 9039-2021 - Aluminum zinc alloy coated steel wire (BJ KLSA)
SNI 7705-2020 - Calcium silicate flat sheet
SNI 03-3122-1992 - Fiber lightweight concrete panels